Water Your Batteries At Any State Of Charge!
Watering your batteries before charging & equalizing is Wrong!
Now 2 Wrongs Make a Right!
We’ve all been told never water the batteries before you (1) charge or (2) equalize them.
With the BWT TB4.5 Valve: You can water your batteries at any state of charge! 2 Wrongs make a right!
The BWT TB4.5 allows for watering at any state of charge because it maximizes the ability to keep acid in the battery, while drastically reducing boil over and corrosion caused by watering at the wrong time.
Water your batteries at any state of charge!
With the BWT VB-TB4.5 Valve
WIDEST PRESSURE RANGE – The valves operate with pressure from 3-35 PSI using our filling devices. House static pressure should never be more than 90 PSI. If needed, a variety of pressure regulators are available to lower pressure.
5 YEAR WARRANTY -The valves are warranted for a full five years (fast charge for three years). If a valve causes a cell failure due to a manufacturing defect, the valve and the cell will be repaired or replaced.
FASTER – With less time spent watering batteries, employees will have more time to take care of other responsibilities.
SAFER – The internal working components of the valve are above the cells, keeping them out of the electrolyte. The level indicator eye verifies proper valve operation. Valves should only be removed during routine maintenance, eliminating the risk of battery acid exposure or damaging floors and equipment.
BETTER – Battery Watering Technologies’ valves add the correct amount of water every time. With proper battery maintenance, you can add years to the life of your batteries.
Some makes and models not applicable.
Hydrometer readings can be taken without removing the valve from the battery. The hydrometer opening has a slider with a stop so the covering won’t break or get lost.
The tubing barbs eliminate the need for clamps, and they are angled to make installation easy in tight configurations.
The z-Lock feature integrates the tee piece with the valve for added strength.
This unique indicator eye is visible from the top and side. It confirms proper operation of the valve.
LOW PROFILE DESIGN
The unique valve design reduces the risk of damage from battery cables.
Installation is fast and easy: Gently push the valve into the vent well to install. No twisting is necessary to lock the valve in place.
Reinforced encapsulation protects the float and eliminates interference with the moss shield.
SOLID ONE PIECE FLOAT
Acid, temperature and impact resistant float is solidly constructed and cannot absorb water.
Water flows through a single connection filling each battery set accurately, eliminating all the guesswork. Our innovative clip-in valves make installation of pre-strung systems fast and easy.
Multiple safety features make our valve the safest watering system on the market. The internal working components of the valve are above the cells, keeping them out of the electrolyte. The level indicator eye verifies proper valve operation.
Instead of hand-watering your batteries, our single-point watering system fills your batteries to the proper level every time.
THE FASTER, SAFER & BETTER WAY TO WATER.
With Battery Watering Technologies single-point system, there’s no more opening vent caps manually and filling each cell individually. Instead, each battery is equipped with an easily installed series of interconnected valves which replace your existing vent caps. An electrolyte level indicator gives a visual indication that the cells were filled after watering.
Water flows through a single connection, filling each cell accurately and efficiently. The whole process takes less than one minute. Since batteries need to be filled several times each month, the 90-95% savings in time translates into substantial cost savings. With watering time dramatically reduced, employees become available for other tasks.
BWT warranty is second to none. The valves are warranted for a full five years (fast charge for three years). If a valve causes a cell failure due to a manufacturing defect, the valve and the cell will be repaired or replaced. No other watering system manufacturer offers a warranty as comprehensive as Battery Watering Technologies.
PROUDLY MADE IN THE USA.
Manufactured with the highest quality materials, all BWT valves are designed to handle demanding applications that keep all working parts above the battery cell.
BPS can cover all your battery watering system needs!
For complete Battery Watering Systems for all makes and models of industrial batteries to full line watering systems Replacement Parts, Accessories and Watering Service!
Why Batteries Need Water!
An introduction to battery watering and battery watering systems!
Did you know that batteries require water?
Watering batteries is one of the most overlooked steps of battery maintenance. Without water they will not hold a full charge and will eventually need to be replaced. Watering them on a regular basis will increase the run time and the longevity of your batteries.
Why do you need to water batteries?
Batteries get their power from a chemical reaction between acid and water. Water is lost through charging and evaporation. That water needs to be replaced to keep your batteries healthy.
Water Your Batteries the Faster, Safer,
Instead of hand-watering your batteries, our single point watering system fills your batteries to the proper level every time.
Water Delivery Options
Direct Fill Link
The direct fill link is the easiest way to fill batteries. The pressure sensitive handle operates like a watering gun. The flow indicator is encased in clear PVC pipe making it extremely durable and easy to see.
The manual pump is the most inexpensive way to manually fill your battery with water. Simply place the end in a jug of distilled water and attach the quick connect to the watering system.
Gravity Fill System
Ideal for filling batteries when a water source is not available nearby. The gravity tank is available in 2.5 and 5 gallon capacity
So you know that batteries need water but it’s just not getting done!
That’s why we offer battery watering services!
Let BPS water for you, and know it’s getting done!
Whether you have just one electric forklift or a fleet of trucks in a high throughput distribution mega-center, BPS can make sure your batteries get the water they need on schedule, every time! Stop drying out your batteries, contact BPS today about setting up a watering schedule to fit your needs!
From large to small – we’ll water them all! All battery makes and models covered for all classes and styles of electric forklifts.
The Direct Fill Link Plus combines the original Direct Fill Link and equips it with our patent pending Flow Meter. The Direct Fill Link Plus provides real-time data of the amount of water you are putting into each battery at each watering cycle.
DIRECT FILL LINK PLUS
Blue Connector (09FBLUT3)
Part #: DF72PLUS
DIRECT FILL LINK PLUS
Grey Connector (09GRF1)
Part #: DF72GPLUS
DIRECT FILL LINK PLUS
Black Connector (09FUM1)
Part #: DF72FPLUS
Looking for a complete Battery Watering System for your electric forklift batteries?
Contact BPS today to speak to a professional and knowledgeable BPS sales representative.
Battery Power Systems specializes in Forklift Battery Watering Systems for all makes and models of forklift batteries. Whether you have a large electric forklift fleet or just one electric forklift. A complete battery watering system will take all the work out of watering batteries. If your Syracuse, Rochester, Buffalo, Olean, Jamestown NY business would like to learn more about how a complete battery watering system will save your company time and money. Contact your dedicated BPS sales representative today!
Join the Battery Power Systems Mailing List
For product and service updates as well as special offers and promotions only offered to NY BPS mailing list members!